Samsung has done new and different things each time that will prevent everyone from rooting devices or flash custom ROM. Manufacturers never wanted to use custom firmware on their devices instead of stock firmware. So, Now many Samsung devices track your devices Flashing process. Samsung device remembers that how many time you flash the custom firmware or Rom. Most irritating thing is that sometimes device shows some sort of warning and mainly “Yellow Triangle” warning is shown during boot if the custom firmware is installed on your device. But now don’t worry Triangle Away apk is helping you to deal with it. This app makes all warning to go away during boot and make your device flashing counter to zero.Actually Triangle away app is really useful for if anyone loves to flash custom Roms all the time but Samsung flash counter is a problem. Use this app and reset your Samsung device flash counter to 0. All information about how to use an app or supporting list is given below read it carefully.
Note: This app can try to work with the bootloader, It’s dangerous and can harm your device. This can be permanent brick your device (Then only board replacement going to help you)
Download Triangle Away Apk:
Download triangle apk from below given link. You can download Triangle Away apk for free from below, Play Store has only paid version of this app. This app is not updating since 2014. This is the latest version of triangle away app. This app is developed by Chainfire. Before downloading and using this app make sure your device is rooted. Android version 2.3.3 and up required to use this App. Updated devices after January 2014 cannot support this app, only a few devices are supported. Use this app at your own risk.
How to Use Triangle Away App?
- First of all downloaded app from an above-given link.
- Install Triangle Away app (Make sure unknown sources is enabled)
- Now open app it loads some files. Grant root permission to the app.
- Now app shows device current status ( Flash counter, Binary- custom or stock and device model)
- Make sure all given info is correct and click on “Reset Flash Counter”
- Now Warning Pop-Up click on OK button.
- It may take some time and then reset completion message pop-up, Click OK.
- Now app auto close.
- Open app again and flash counter is reset to zero.
- Binary also changed custom to stock.
If Triangle Away Apk does not support your Device Firmware?
On many devices the app is working, but what if device custom firmware is not supported by an app. The app will need to reboot your device into special boot mode if you select “Reset flash counter”. The device will reboot into a special mode which will allow you to check out current status and reset the binary and flash counter values. On some devices, this will actually trigger the counter to 1 if it’s 0 – so if you’re “just checking”, do that in download mode!
Triangle Away Supported Devices and Model Numbers:
– Sprint Epic 4G Touch
– GT-I9305/I9305T/I9305N LTE
– USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC, MetroPCS, Cricket, CSpire
– SHV-E210K/L/S, SHW-M440S
– USA: AT&T, VZW, Sprint, T-Mo, USCC
SG Note 2:
– GT-N7100/N7100T/N7102/N7105/N7105T **
– USA: AT&T, Sprint, T-Mo, VZW (unlock bootloader !), USCC
– Canada: I317M, T889V
SG Note 3 (4.4+):
– USA: T-Mobile, Sprint
– Canada: SM-N900W8
– Asia: SM-N900S/2/6/8/9
SG Note 8.0″:
– GT-N5100 3G
– GT-N511x Wi-Fi
– GT-N5120 LTE
SG Note 10.1″:
– GT-N8000 3G
– GT-N801x Wi-Fi
– GT-N8020 LTE
SG Camera EK-GC100
SG Tab 2:
– GT-P310x 7″ 3G
– GT-P311x 7″ Wi-Fi
– GT-P510x 10.1″ 3G
– GT-P511x 10.1″ Wi-Fi
– I8160, I8190
– S7500, S7560, S7562
How to Check Flash Counter Current Status without App:
You can find out the current status of your flash counter and firmware state (custom or official) by booting into “download mode” on most devices. The usual way of getting into “download mode” is by first turning off your device, then turning it on by pressing and holding VolDown+(Home)+Power. Alternatively, the “adb reboot download” command also often works. Note that some newer device like the S4 do not show you the flash counter anymore – but it is still there.
Permissions Triangle Away Required
retrieve running apps
Read the contents of your USB storage. (Photos/Media/Files)
Modify or delete the contents of your USB storage. (Photos/Media/Files)
Take full network access.
Run at startup.
Prevent a device from sleeping. (Consume more battery power)